Mitsubishi System 3 Axis CNC Machining Center , High Speed Siemens CNC Machine

Mitsubishi System 3 Axis CNC Machining Center , High Speed Siemens CNC Machine


3 Axis CNC Machining Center Special Features:
For the base, Taesin 3 Axis CNC Machining Center has bigger span in the base to ensure high rigidity and smooth performance. Saddle is made wider and thicker than traditional to improve the ability to do heavy cutting and processing. The whole machine body structure has been strongly ribbed and casted. For maintenance,, the rotary table can be taken off without disassembling the saddle. The super size and high precision rotary table can handle heavy loading. Lubrication on the rotary table can make the table rotates smoothly and stably. The backlash during machining can be erased by the servo-motor drive and double worm gear driving system.
The advanced CNC system can guarantee the faster and accurate processing, which also can increase the productivity by this smart and friendly software and use-friendly interface. The CNC system can also control the feed rate automatically to keep the working load at a reasonable level, which can protect the tool and prolong the working life and productivity. The cutting and feeding parameters can also be set by this CNC system according to the machining requirement.
For guarantee the quality, the geometrical accuracy and repeatability and positioning accuracy are all tested by laser equipment. The machine roundness is measured by ball bar. And the geometrical testing is completely after 24 hours when cutting and machining test is finished.
Taesin 3 Axis CNC Machining Center has bigger span in the base to ensure rigidity and stable performance. For improving the ability to do heavy cutting and processing, saddle is made wider and thicker.


3 Axis Linear Way CNC Machining Center Technical Characteristics:
High Rigidity and High-speed Spindle: 8000(10000)RPM
X/Y/Z Axis Traverse Speed: 48/48/48m/min
Fast Tool Change System: 2.0S (24T Disc too magazine)
Taiwan high-speed Linear Guide Way, X/Y Axis Ball type (30mm), Z Axis Roller Axis (35mm)
High strength and rigidity meehanite casting is treated with annealing for stress relieving; and more than 1.5 years natural aging brings no deformation
X/Y/Z Axis with European Class-P Linear guide way (45mm) provides heavy loading, fast traverse and precise positioning
Rib-structure reinforced spindle holder for increased processing rigidity
Super-wide base, box-type column, longer and wider saddle-base, full support design to improve heavy-loading capability.


3 Axis Linear Way CNC Machining Center Quality Control:
The machine is also inspected by our advanced engineers using the laser interferometer for the positioning deviation&repeatability according to the highest standard. The machine is also checked for its geometrical accuracies before delivering.
The CNC Horizontal Machining Center is also tested in our company with the related workpieces and required tool. And in the process, our engineer also fully inspected the testing process and achieve the highest precision.
Before delivering, we also verify all parameters against machine specification and technical data. Machine will run continuously for 8 hours at full rated parameters. After the running test, the machine should be under perfect working condition. After installation and commissioning, we guarantee that positional and geometrical accuracy values will be verified.


TXC-V10 3 Axis Linear Way CNC Machining Center Technical Data: