Digital Ruler Turret Milling Machine X Y Axis Electronic Auto Feed 80 To 5440 RPM

Digital Ruler Turret Milling Machine X Y Axis Electronic Auto Feed 80 To 5440 RPM

Taesin Turret Milling Machine Introduction:

Taesin Turret Milling Machine has a wide range of metal cutting capability, which is also one of the versatile conventional machine tools. By this milling machine, some complicated machining can be completed, for example: gang milling, straddle milling, indexing etc.

The spindle, bearings, gear box, clutches, shafts are in the turret milling machine column. The speed from the servo motor to the spindle can be adjusted with a good transmission structure. The working table is supported by the knee in front of the column, which can also make the Z axis move up or down.

Taesin Turret Milling Machine's saddle consists of two slideways, one on the top and one at the bottom located at 90º to each other, for providing motions in the X or Y axes by means of lead screws. The working table is placed on top of saddle and can move along the X axis. There are some T-slots on the top of the working table for clamping the workpiece.

The turret milling machine base provide the structural support with the column for the whole machine.

The base of the milling machine, along with the column, are the major structural. The milling head consisting the spindle, the motor, and the feed control unit is mounted on a swivel base such that it can be set at any angle to the table. b. Ram The ram on which the milling head is attached can be positioned forward and backward along the slideway on the top of the column.

Taesin Turret Milling Machine Technical Characteristics:

• Strong Milling head from Taiwan

• Auto Lubrication and Coolant Device

• The working table and guide rail are heating treated and precision grinding.

• Grinding on slideways of column

• Table face hardened and ground

• Hardened and ground spindle gear.

• Dynamically Balanced Motor and Ground Pulleys.

• Chrome-Plated and Bearing Supported Motor Shaft Provides An Extremely Smooth, Low Vibration Quiet Drive.

• High Precision Spindles Use Class 7 Angular Contact Bearings.

• The Dovetail and Square Slideways of The Table

• The hard chrome quill is ground to mirror finish to ensure smooth movement.

• Z Direct Drive Connection between the motor and spindle

• XYZ Servo Motor

• X Travel 980mm

• Taiwai SYNTEC CNC System

Taesin Turret Milling Machine Technical Service:

1. Installation and Testing: Our engineer provide free installation and testing, and train local operator and mechanic; Buyer should bear the cost of flight ticket, food and hotel.

2. Technology Support: According to the finished product features, engineer will adjust related CNC machine parameters and train local operator and mechanic.

3. Guarantee: 12 Months after successful running; Any damage because of quality during 12 months, Seller will be responsible and provide the parts for free.

4. Within 24 Months, we provide software technology consulting service.

5. Spare Parts Supply: For providing better service, our company would like to provide the spares parts at the cost price.

Taesin Turret Milling Machine Packing:

For the packing, we provide faultless packing to avoid any damage or deterioration during delivering to the final destination.The packing can withstand rough handling during transit and exposure to extreme weather. We had taken various factor into consideration for designing and producing the durable package.

Taesin Turret Milling Machine Technical Data: